The amount of water we drink and use every day is good for us and necessary for health. Home Water test kit come in a variety of sizes and whether it is right for you will depend on a few factors. Depending on which contaminant you are screening for, you will see several test kits with both strip and color discs.

 Types of Water Testing Kits

Before you dive into the water test title at home, I will follow the steps to help you choose the right water test kit. Whether you get a definite answer about the quality of your water from the testing kit sitting at home plays an important role in this.

 Water quality test strips

Test strips are the most common method of water quality testing because they are affordable and easy to use.

Fill the test container with a water sample, dip a test strip, turn the container back on and wait a few minutes. You will then compare the color changes of the test strip with the color chart included in the kit. The test strips can indicate the type of contamination and its ppm (parts per million, a.k.a. its concentration level in your water). While test strips are not as appropriate as other methods, they offer a range that can identify concerns.

Colorful disk kits…. Instead of strips, these water test kits you add a few drops of water to a container with powder, shake and place it in a watch box. Rotate the disc of the given color, you will compare the colors with the containers until you find any match. So These kits have been shown to have better accuracy than test strips for certain types of contaminants such as bacteria.

How to test water at home

  1. Identify a water source
  2. Choose a test method
  3. Decide which contaminants to test
  4. Check EPA values
  5. Ensure the accuracy of the results
  1. Identify which water source you want to test

The testing kit you want depends on the water you are testing. In a word If you are interested in testing your city’s drinking water, there is a basic kit that covers common contaminants such as lead and chlorine. If you have good water, you need a water quality testing kit that includes more extensive and screening for pesticides.

2. Choose the water quality test method

Most water quality test kits are ready for one-time use. So,You should also consider whether you plan to follow the initial home test through testing using a professional lab. Since most test strips give broad results rather than fixed numbers, the accuracy of color disk kits may be increasing.

3. Decide which contaminants need to be tested

What your kit tests for is a critical measure of how effective the results will be for you. Different water sources are more likely to contain certain types of contaminants. For example, inferior water is often used in rural areas where runoff drinking water from nearby fields can affect the levels of pesticides or fertilizer toxins in the water.

Which common contaminants should be tested in water quality kits?

Look for kits that only provide information about the following at a minimum time:

  • Bacteria
  • Lead
  • Nitrates
  • Nitrites
  • Chlorine

Also, further research on the pH level (acidity vs. alkalinity) and general hardness of your water can be effective in solving quality problems such as taste or odor.

4.  Calibrate the test to EPA values

Although the EPA does not support specific indoor water testing kits, it does provide a list of how many times your drinking water needs to be tested and hazardous factors can cause contamination. If you have city water, your municipality often has to provide public testing results every year to prove the safety of your drinking water. For those with good water, the EPA has easy-to-use contaminated tables so you can test your results against acceptable standards for safe drinking water.

5.  Ensure the accuracy of your results

Test strips are easy to use and read, getting accurate results is a bit more than getting in front of the eyes. If you want to maximize the effectiveness of your water quality testing kit, here are a few tips to follow.

 Water quality test tips

  • Read the directions. 
  • Do not open the test strips until you are ready.
  • Wash your hands first.
  • Keep a timer nearby.
  • Use cold water. 
  • Be careful.

Redwan Rahman

I am an SEO expert and founder of " lifewaterss.com". I have an interest in all areas of technology. I love learning and applying something new. My passion, devotion, and ability to make quick decisions force me to stay away from others.

0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *